plastic furniture connector fitting

plastic furniture conncetor provide a plate connected to plate connector, making the connection plate without using nails

Connecting fitting,Furniture Connector,Plate Connectors

Technology:

This utility model relates to a material connection devices, specifically relates to a plate connected to plate connector.

  

Background Technology

 All kinds of plates like sheet wood, plywood is basic buliding material for the manufacture of furniture, home decoration as well as interior wall panels - especially the temporary board room.Connection between the plates is an important part of the manufacture or installation.

The traditional way to connect with nails or screws with fixed, which will result in a lot of inconvenience to transport from production, to installation and removal.Such as furnitures to be bound in factory, because of not easy disconnect,the whole furniture will take up a lot of shipping space and a lot of manpower and resources resulting in tremendous waste.Such as temporary board room if using traditional connect methods, they must be professionals in the manual, install with the low efficiency, but also difficult to remove, and removal may damage the sheet, thus affecting the construction progress or can not re-use sheet.

  Our products  is a simple, easy-to-plate connections, making the production of furniture, or  easy installation for board room set up without binding and transport, as well as demolition.

 

Invention content The purpose of this utility model is to provide a plate connected to plate connector, making the connection plate without using nails or screws, to overcome the deficiencies of existing technologies.

 

The Joint of the utility model, including a chimeric structure of the left and right sets, and the connecting shaft of three parts, one end of the connecting shaft eccentric gear, central part of the lift plate; and left and right sets of sets of the lower part is the cover, the Eccentric gear sets exposed at the lower end of cover.

 

 

Taking into account the mutual mating shaft connected the left and right kit to regularly rotate, the connecting shaft of the lift under the side panel with spiral teeth, and left and right sets of the inner cavity are consistent with the helical screw alveolus.

 Taking into account the increase of the connecting shaft support, in the left and right sets of the cavity, each has a splint.

 

The chimeric structure of the left and right sets of surface contact between pin and hole positioning.

 

 Resolved by plate-based products in factory production, logistics and transport, on-site assembly or disassembly difficult second simple, rapid installation, disassemble and transport the space occupied by a large number of problems

 Photo description

Figure 1 is a three-dimensional structure of the utility model diagram. Figure 2 is the decomposition of the overall structure of utility model diagram. Figure 3 shows the utility model of the left sleeve of the left view.  

Figure 4 is the right sleeve of the utility model right view. Figure 5 is the utility model right and left sleeve of the three-dimensional structure diagram.

In which a connecting shaft, 2, left sleeve, 3, the right sleeve, 4, eccentric gear, 5, lift plate, 6, helical gear, 7 pin, 8, positioning holes, 9, plywood, 10 journal sets, 11, spiral groove, 12, screw, 13, interconnect, 14, interconnect. Specific way of implementing As shown in Figure 1-5, a plate connector, which is characterized When using this utility model, the first embedded interconnect 13, will lift off panels 5 and mating with each other left and right sets of 2,3 on the surface of 90 degrees, then eccentric journal sets of teeth 4 and 10 inserted into a connectivity board 14, simply press the lift plate 4 can be screwed into eccentric gear 4 interconnect 14 to achieve the purpose of connection.

 

 

 

 

 

plastic furniture connector fitting